TOP SHINE ELECTRONEC led display instructions
Table of Contents
1)LED display Brief Introduction································································
2)Safety Notice ······································································ ··················································
3)Notes of Screen Installing and Using
a)led module ······································································· ··················································
b)LED display Cabinet······································································· ··················································
a)Fixed Installation structure sketch ···································· ··················································
b)LED SCREEN Cabinet installation steps ················································· ··················································
c)Installation method illustration
a) The basic configuration requirement for PC
led Display card driver setup
Sending card installation
7)The connection between PC and LED display
a)The connection between PC port to LED display(System 1)
b) The connection between PC port to LED display(System 2)
c) Single cabinet netline input&output connection sketch
d) Same row cabinets netline input&output connection sketch
e) LED display netline connection sketch in whole
8) Electricity cable connection
a)Single cabinet inside electricity cable connection
b) electricity cable connection between same row cabinets
c) electricity cable connection between up&down row cabinets ( Sketch in whole)
9 ）Ledstudio installation
10) Setup and debug
11) How to use LED display correctly
12) Introduction of whole function of LED Para
13) Interface window introduction and use illustration
a)Interface window introduction
b)Screen setup function introduction
14)Usual Problems and Solutions
Thank you for choosing this series LED display . Through reading this manual, you could have a total understanding about LED display installation and operation, and know its perfect and advanced function and simple operation method.
1. Before using the product, please read all the instruction carefully.
2. Keep in all the manual as to the future reference.
3. Do not use the attachments not recommended by the manufacturer,please contact TOP SHINE factory, as it may cause danger.
4. As safety , this screen electricity power with a three-pin power plug, the third pin will be connected with the ground. If your plug cannot plug into the electricity outlet, please contact with the electrician and change to a new one. Do not let the safe function of the three pin plug disabled.
5. Please make sure power supply socket and power cable which you used can resist the sum of all rated current.
6. Carefully observe all warnings, precautions and the one described in the manual .
7. Do not overload power supply socket, since this can result in fire or electric shock.
8. Do not attempt to check and maintain the display yourself because open or move cabinets will have high voltage or other hazards.
Refer all servicing to professional and qualified technician.
9. It show the LED display need to be checked if LED display appear obvious abnormal conditions, first shut off electricity power and then ask professional and qualified technician to check and repair.
10. Please take care of the maintenance of LED display . Never let water enter into the LED display body.
11. Please take care of cooling system (such as fan, air-conditioner) and see if it runs in normal. It will produce some heat during display working and cause the LED display body temperature increase if the heat could not be emited effectively.The too high temperature of display will decrease the lifespan of LED, and even damaged IC or LED lamp .
12. Better shut off the electricity power of LED display in thundering weather , to prevent current caused the hurt to LED display.
13. Avoid the communication cable touching or getting near to high voltage alternating current or any other interferential source which have the electromagnetic radiation. Or else it will affect the screen picture , even seriously will hurt to screen.
Notes of TOP SHINE LED display installing and using
1. Before installing must check the frame structure have been made reasonably and make sure that the frame structure has been constructed correctly. Avoid any return work due to frame structure problem.
2. Pay highly attention to install bottom layer of cabinets. Make sure cabinets be placed flat. Or the cabinets above are hard to be installed and may return work.
3. Before debugging, make sure that power line and data line connecting is correct, reliable. Then turn on the power.
4. Pay attention to the position of the communication cable, avoid the communication cable touching or getting near to high voltage alternating current cable or any other interferential source which have the electromagnetic radiation.
5. Strictly abide by the sequence of turn on and off LED display and PC . Better do not turn on LED display electricity power until the PC monitor enter the needed pictures.
6. The turn on and off sequence of LED display:
Turn on ：Turn on the control computer until normal running, then turn on LED display
Turn off ：First turn off LED display then turn off computer
7. The LED display body strictly forbide the enter in of water or other easy electricity-conductive metal objects such as iron powder
8. Please immediately shut off power if water enter in due to various reasons and do not use with electricity, and could use until the PCB of Led display body dry enough
9. Led display is combined by lots of electric components which have power consumption, although single component is low power consumption, but TOP SHINE could not despise the power consumption produced from lots of components working at the same time. The continuous long time using will emit heat in large quantity and prick up the attenuation of LED lamp and affect its lifetime, so please pay attention to the treatment of heat emission.
10. Do not put LED display at full brightness state for long time, it will result in temperature increase of LED display and affect its lifetime, due to the big increase of temperature will cause the picture color look not vivid.
11. Do not move the PC frequently, turn off it if not working.
12. Please turn off the LED display in case of special weather such as thunder, bolt ,etc. or the AC voltage not stable.
13. Every month check one time of 220V AC power and heat emission equipment inside LED display
14. Do not change easily the fixed technical parameter setup by manufacturer. If the parameter is not set correctly, the display quality of screen will be affected much.
15. To achieve the best display effect, please setup reasonably for screen brightness and contrast degree when display different contents.
16. Please use the spare parts which provided or permitted by manufacturer, the manufacturer will not be responsible for any loss due to use the spare parts which did not get the permission from manufacturer.
1. The module is smallest unit of outdoor full color LED display , modules compose to cabinets, cabinets compose the LED display with different sizes needed by customer.
Front of module Front&Side of module Back of module Back &Side of led module.
2. Cabinets are the basis of LED display with different sizes which needed by customer Cabinet frame Front view of cabinets Back view of cabinet Side view of cabinet Bottom view of cabinet Above is cabinet structure of our LED display , which is our hot-selling product of outdoor full color LED display .
Other outdoor full color LED display have similar structure.
1. Common Installation type
(A ) Base Type (B) Inlaid Type (C ) Hang Type(D) Double Poles Support Type (E) Wall mounted Type (F) Single Pole Support Type
Above are six common installation types. Commonly, outdoor LED display could adopt type A/B/C/D/E/F, indoor LED display normally adopt type A/B/C/D.
Outside framework structure and decoration
The design of the outside framework structure is decided by the installation requirements of LED display, screen size and color of surround circumstance. With the condition of guarantee adequate installation intension, try to minimize the weight of the framework.
For indoor LED display , normally there are two kinds of material of outside framework: black aluminum alloy, aluminum alloy covered with stainless steel( Dull and Bright)
1) Black aluminum framework is simple in structure, the color is close to the background color of LED display .
2) Aluminum alloy covered with stainless steel framework is very beautiful and elegant.
For outdoor LED display, in order to make sure having enough installation intensity and strict water proof effect, outside framework should be steel structure. According to onsite circumstance and user’s requirement, normally aluminum panel with plastic coat be used for the decoration. Their advantages listed below:
1) The color for aluminum panel with plastic coat is abundant and versatile , could be selected as per different request.
2) The surface of the aluminum panel with plastic coat is high quality and smooth.
3) It could realize glue and connect in case of gaps and meet with the nice looking demand.
Check whether the structure of LED display is made in reason or not
a. The bottom layer structure should be solid
b. The width and height of the structure is correct or not, normally 5-10mm larger than LED display is proper.
c. The distance between two pillars from the bottom to the top should be strictly the same. Otherwise, it will cause gap when install the LED display cabinets. Badly, it will be difficult to install the top layers of cabinets or could not install and return work.
d. Check the passage position inside the maintenance box is suitable or not and if it will block the cabinet door, if not suitable the cabinet door could not be opened after LED display finished installation.
e. The holes for cables going through at two sides of cabinets will not be blocked
2) According to the number of cabinets, please install the cabinets from the bottom to the top. The connection between cabinets method is showed as following.
Make sure that the bottom layer of cabinets should be very flat, and then install the upper layer cabinets. Put water-proof glue onto the joint between two cabinets. After the whole LED display finish debugging, the LED display framework around should do strict water proof treatment.
3. Connect well the electricity power line and netline according to cable layout illustration
led display cabinets
3) Software Setup
Basic Configuration requirement for computer:
Operating system :Windows98/me/2000/NT/XP
Hardware system : CPU Pentium 300Mhz or above
EMS memory: 64M
led display connect
Top Shine Electronics is a responsible manufacturer specializing in manufacturing 【TOP SHINE】DIP outdoor LED display board bus led screen,taxi top led display, front maintenance,SMD indoor led module|pharmacy cross led screen,LED module|advertising full color LED display sign|p10 single color led board p8 p6 p5 p4 p3 p2.5 p2. Top Shine Electronics was founded in 2008,certified with ISO9001:2008 management system.It has 50 employees currently and fabrication area 3,000 square meters.Through hard working and continuous innovation,we have earned good reputation as one of the largest suppliers in china.The company has a factory for LED encapsulation and purchases LED chips for processing,which ensures the quality of the products and makes them competitive in price. We have an excellent and professional teamwork,modern production lines,advances crafts & equipments,and introduced ISO9001:2000 quality managing system,which provided enough guarantee on resource and quality for the rapid growing and strengthening.Now our products are well sold in Europe,America and Asia market with more extensive popularity in international market.Taking "High Quality",Lowest Cost","Fast Turnover","High Efficiency","Satisfy Customers"as goal,your joining and cooperation is welcome!
Problems and solutions
Phenomena Reason Solutions
Indicate lights of part of the driving board are not lighting contact wechat and whatsapp: +8613425161617 please.
1) No electrical supply(220V)
2) Not proper touching of circuit
1) Test the power supply if have electricity or not
2) Check the switch and power supply line
3) Power supply damaged or not
No picture displayed for screen, the green light of the sending card glint, the green light of the receiving card do not glint
1) (RJ45) head of net line not plug well
2) Something wrong with output and input port of the data
3) Receiving card without electricity supply
4) Something wrong with the receiving card and sending card damaged
1) Re-insert(RJ45) head
2) Validate the port of the output and input
3) Check receiving card with power supply of 5V
4) Delivered to professional staff to check and repair No pictures displayed for screen, the green light of the sending card do not glint
1) DVI line not connected well
2) The setup of the display attributes are
3) Something wrong with the sending card
1) Check the DVI connection head
2) Re-setup again.
3) Delivered to professional staff to check
“No big screen system found” appeared when the PC launched
1) Serial port and big screen system not connected
2) Sending card Damaged
3) COM of the PC Damaged Validate, re-connecting
The long bar equal to the height of 1 led module do not display
1) Flat line disconnected or connect not well
2) Something wrong with input or output of front led module or next led module
1) Re-insert or change
2) Check, dredge
4~5 cell boards do not display 1) Power supply protected or damaged Test, change
2) The AC power line not connected well
The whole cabinet no display 1) 220V power supply line not connected
2) RJ45 head of netline not pluged
3) LED DISPLAY Receiving card damaged
1) Check the power line
2) Plug the RJ45 head of netline well
3) Change the receiving card
Whole screen disorder or has distorted pictures
1) Something wrong with LED Para program or do not run
2) The net line sequence not right
3) The signal of the transmission is too weak
1) Operating again
2) Tidy the order of the net line
3) Shorten the distance of transmissionTop Shine Electronics is a responsible manufacturer specializing in manufacturingLED display
Phone: +86 13425161617(wechat & whatsapp)
Add: 4th Floor, TianRui Industrial Park, Fuyuan 1st Road Fuyong Town, Bao\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'an District, Shenzhen, Guangdong Provience